Camberwell, Melbourne 24/7 Emergency Garage Door Repair
Specialising in repairs of all types of garage doors
IF IT'S BROKEN WE CAN FIX IT
Door not locking
Door ballooning out at top when closing
Door not closing smoothly
Cracked or corrode weather seal (doesn’t seal correctly)
Noisy or squeaky door
Broken cable on garage door lock
Door not sitting level
Roller out of hinge or broken
Broken cable/cable drum
Door will not stay closed/door keeps opening
Cracked or corroded weather seal (doesn’t seal correctly)
Noisy or squeaky door
Why Choose Us
We are approved installers and have all the necessary qualifications to install or repair any garage door from the major garage door manufacturers.
Reliable & Trustworthy
As a small family run business, we understand the importance of good quality work. We give a warranty on all labour and parts.
24 Hour Service
Yes, you hear it right. We will get to you at any time, day or night 7 days per week.
A List of the Most Common Garage Door Problems and Troubleshooting Tips
A little garage door troubleshooting can go a long way in maintaining your door’s build and functionality. Because of the number of cycles your garage door endures through daily use, garage door repairs and annual maintenance are common.
Although there may be repairs and maintenance that you can’t handle on your own, there are common issues that you can fix yourself. The sooner you identify and fix the issue, the less damage and cost you’ll have later on.
Get your tools and gears ready.
Here are the most common garage door problems and their easy, no-fuss repairs.
Just a little reminder: These troubleshooting tips should be done at your own risk. If the issues are not self-evident, please refer to the garage door or opener manual or contact us directly. There’s nothing that our garage door specialists can’t fix in our industry, and we’re here to ensure that your garage door and opener repairs are completed safely.
1. Garage door opener won’t work
This has got to be everyone’s number one issue, and it’s something that can be easily fixed. Chain- or drive-screw-operated garage door openers that won’t work probably need some lubricant to reduce friction. Apply a generous amount of silicone-based lubricant or garage door spray lube to the garage opener’s full length and be sure to wipe off the excess.
2. Annoying, grinding noise
Loose hardware, shabby parts, or squeaky sections—these annoyances are all common problems with simple solutions. Generally, the noise coming from your garage door means it needs lubrication. If you notice any unusual noises, try applying lubrication directly on the squeaky part.
3. Cracks or gaps
Cracks are very common, especially for wood garage doors. To keep cracks from worsening, use a waterproof filler or sealant to caulk the cracks.
4. Cracked or broken weather sealant
Weather sealant keeps water out, seals air leaks, and reduces street noise. If your sealant is broken, or you notice any cracks and seams, you may need to replace it. Remove the old weather sealant and install a new one. Weather sealants are available at your local home improvement store.
5. The garage door opens a bit then immediately closes
When this happens, the springs found at the top of the door likely need replacing. If you replaced the garage door springs within the last three years, you may only need to replace the broken ones.
Pro-tip: To save on costs, we recommend that you replace all springs at the same time—replacing broken springs separately could double the cost of this garage door repair.
6. The door closes then immediately opens
There could be an issue with the alignment of your garage door’s photo-eye. Photo-eyes are small plastic devices that serve as a safety feature and are located on both sides of the garage door.
To confirm that the photo-eyes are working properly, look for a flashing green light on the device. Otherwise, check to see if there is debris or other obstructions in front of the photo-eyes.
After confirming that the photo-eyes haven’t been misaligned, you then need to measure from the ground up all the way to the centre of one photo-eye. Take another measurement, this time from the wall up to the centre of the photo-eye. Do the same on the other photo-eye. Finally, adjust both the photo-eyes following the measurements you took, ensuring they are aligned.
7. Garage door doesn’t seal to the bottom
The best solution to this is to use pipe insulation and securing it into the part of the door that doesn’t properly seal. You can buy pipe insulation at your local hardware store.
8. Garage door remote is broken
Nothing gets more common than this type of mechanical issue. The first thing to do is to check if it’s battery-related. Are your batteries properly inserted or do they need replacing? If this doesn’t fix the issue, you may need to refer to the manual and see how to reprogram the remote.
9. The garage door opener or operator is unresponsive
Whether you’re using a wall controller, remote, or key-less entry, an unresponsive operator could mean there’s an issue with the photo-eyes. If there aren’t any signs of light on the photo-eyes, go to the breaker panel, locate the breaker, and try turning it on and off. If this doesn’t fix it, check if the garage door opener is properly plugged in and that there’s a power supply to it. Test the electrical outlet with a different device to check if it’s working.
10. Unsightly and damaging rust formation
Aside from tarnishing the look of your garage door, rust also compromises your door’s ability to lock out dirt and other external elements. Rust usually forms when the iron gets exposed to air or water for a long period. To remove rust, clean the affected area with dish-washing soap first, then rub the rust with a cloth soaked in vinegar. Vinegar is a natural rust dissolver. Sand the rusted part and, if it doesn’t negate your garage door’s warranty, apply a fresh coat of primer and paint (check with us first!).
You can avoid rust formation with annual maintenance work during spring or fall.
Have a garage door emergency?
Garage Door Repair By Suburb